Showing posts with label Hobby Lobby. Show all posts
Showing posts with label Hobby Lobby. Show all posts

Sunday, March 8, 2015

Christmas Chalkboards

Once again, Pinterest is a wonderful source of ideas for so many things.  I nabbed an idea previously seen here.  Come to find out it was a pin from an Etsy site.  I took the basic idea and ran with it as my Christmas gifts for 2014.  I used a variety of stickers for the lettering on the plates, different kinds, textures, and sizes, but I wanted the finished look of the letters.  I bought a quart of chalkboard paint from Michael's and plate chargers from both Michael's and Hobby Lobby.  I asked those individuals I was gifting this item too what their favorite Christmas colors were and I purchased ribbon from the various craft stores to color match what their favorites were.  Some were into the blue and silver colors so I used a silver charger, for most of the remaining ones I used a red charger with a rope edge around the outside of the charger, and finally I picked up a few shaped like a hexagon with pretty script details on the edges of the plates.

I painted the inside of the inner circle with about 6 to 7 layers of chalkboard paint.  I found out it needed at least this many layers to create a chalkboard surface that would not be scratched clean through the paint if someone pressed to hard on the chalk.  I did not tape around the edges, which might have created a more perfect circle, but I decided the unevenness added to the uniqueness of each plate.  Some of the plates look a little more playful and those were intended for gifts to individuals with children.  The candy cane ribbon at the left is one of those examples.

For some more elegant ones, I used combinations of burgundy, green and gold like the ribbon in the upper right and others I used the beautiful elegant gold edged and printed ribbons as shown on the plate to the right.  That particular ribbon choice had beautiful gold angels on it.  With the shape of the charger it also had the added bonus of being a little easier to paint with the chalkboard paint.  Inside the inner section of the charger was a ridge denoting the bottom of the charger from the sides and it was easier to make a pretty, clean edge for the chalkboard paint.


Additionally, I used some ribbons that had a burlap look. The one shown below has some pretty snowflakes in red and sparkles.  Most all of the ribbons had some kind of glitter or sparkle to them. One of things I did after all of the layers of chalkboard paint were on the chargers, I seasoned them by rubbing a piece of chalk over the chalkboard section so they were a little easier to write on the first few times.  Since the letters were all stickers they were easy to affix.  They just need some weight on them initially to cement them on to the plate.  I affixed the ribbons with hot glue.  I had to hold the ribbons in place until the hot glue set.

With each gift of the chalkboard I included 2 pieces of chalk in tiny ziplock jewelry size bags and easels that I picked up from the dollar store.  I think they turned out really well and were well received as gifts by everyone who received them.

I'm thinking that I could make some that would work year round for all holidays!  The chargers would be in a more neutral color and then have ribbons that would attach with a velcro tab under each ribbon.  Maybe ribbons for Easter, 4th of July, Thanksgiving, Christmas, birthdays?  Hmmmmm...

Until the next time, Imagine, Create and Enjoy!

Friday, April 18, 2014

Headbands

My daughter-in-law Dana found here an idea on Pinterest for an elastic headbands station to have at her shower.  She liked this idea because it allowed the guests to personalize something for baby Laila during the shower.  I set about figuring out how to get it done! After visits to JoAnn's, Michaels, and Hobby Lobby I found all the requisite supplies mostly on sale.  Luckily the main part, the stretchy headband materials was sold by the spool at Hobby Lobby and I caught it on a sale day.  I was able to pick up about six different colored spools and ended up getting about six headbands per roll.  I cut them in about 12-14" lengths and sewed the ends together.

In addition to the headbands I picked up matching colors of felt, fabric flowers, pre-made bows, jewels, small butterflies, and small button shapes. The flowers were different colors and patterns (polka dots), different styles (zebra print), mostly daisies, and some other flowers.  I took and pulled off or cut off the flowers from the stems and then hot glued them on the bottom to make sure the centers and the flower layers stayed together.  When I looked at putting them on to the headbands though I felt they weren't going to lay flat on the headbands and would be too heavy for the headbands.  I looked at the original idea and saw some felt circles in the example so went back and picked up some matching felt.  I took my Tim Holtz Tattered Florals die and cut the felt using the largest flower on the die.  I cut about 6-8 of each color so they could be used to glue the flowers on and then glue on to the headbands.

So we set up a separate area at the shower with hot glue guns and all of the different components laid out on the table and told everyone at the beginning of the shower where everything was located and invited them to make their way into the dining room to create their own special gift for baby Laila.

To make sure Dana and Kyle knew who had created each of the headbands, I cut tags with my Cricut and cut 12" lengths of thin ribbon (1/8" wide).  On each of the tags I stamped the word From: on one side and then asked each Guest Headband Designer to sign their creation and tie the tag to the headband they made. The guests were eager participants and enjoyed creating some really pretty headbands for Laila.  We can't wait to see her wearing each and everyone of the gifts.

Here is a group shot of all of the completed headbands.  They really turned out nicely. She will be quite the styling little girl!  Keep on Imagining, Creating, and Enjoying every day!






Tuesday, April 15, 2014

Mesh Wreath

Mesh wreaths have become all the rage as of late.  I decide my first try would be to make one for Laila's baby shower.  I spent a couple of different trips to Michael's, JoAnn's, and Hobby Lobby to check out the supplies, costs, ideas, and colors of mesh.  I spent some time reading through one of the books while standing in the aisle at the store.  After looking at the picture directions in the book I figured I could do this without spending the $10 on the book.  I'd rather spend the money on the supplies for the wreath.


Since I had already started the diaper cake with the bright pink colors, I followed through here.  I chose burlap looking mesh and then a hot pink mesh to coordinate with it choosing to alternate the burlap and pink mesh (I used the smaller 6" rolls versus the large 12" rolls). Once I had finished fixing the mesh to the wreath base (by using pipe cleaners in hot pink), I started adding flowers.  I took pretty Gerber daisy flowers in various shades of pink and white and glued them around the wreath with some pearl accents behind them. The pearl accents were a strand picked up from the floral section at the craft store.  I separated the different strands to maximize them as I wanted some behind all of the flowers. Additionally, I added some pretty butterflies from the floral section of the hobby store and the word Love across the bottom of the wreath. It was in the wood letters section at the craft store and already painted white, so I left it exactly as it came. The letters spell out Laila's full name: Laila Olivia Vivian Elizabeth. She will share names with two of her great grandmother's.  A beautiful tribute to both sides of the family!


Once I hot glued everything together I added a small butterfly on the corner of Love.  Kyle really liked the wreath...enough so he wants to put it in Laila's nursery.  Now I've gotta figure out how to ship it to them in Indiana!

Until next time...Imagine, Create, Enjoy!

Tuesday, April 1, 2014

Diaper Cake -- Round Two!

When I made my first diaper cake last year, an order was placed for the future from my then daughter-in-law to be, for a diaper cake whenever they decided to have a baby!  In fact she asked how I was going to be able to ship it out to them in Indiana!  Well, we didn't have to ship one out to them because they came to California to visit us before little Laila Olivia is born.  Dana, like many of us, loves to peruse Pinterest for ideas.  She had found this idea for a diaper cake and I set about trying my best to recreate it.

Here is a shot of the finished cake.  I changed the idea shown above in the following ways.  I chose to use some hot pink sparkly mesh ribbon as the base on each of the layers and then added the corresponding leopard print or brown and white polka dots ribbons.  I hot glued them on to the mesh and then wrapped that around each layer hot gluing it in the back to give it a finished look.  For the layers I used different sizes of diapers. For the top layer I used newborn diapers, for the middle layer I used size 2 diapers and for the bottom layer I used size 4.  I used the leftover newborn diapers in the center of the bottom layer to finish it out.  I took cake boards and cut circles out of some butterfly scrapbook papers from Susan Winget and KandCompany and covered the boards with that.

The little leopard print slippers I had found at Wal-Mart before I'd seen the cake idea, so they matched perfectly with the ribbon I was able to find at Hobby Lobby. I set those on the sides of the bottom layer.  In addition to the leopard slippers I also found a pair of pink sparkly shoes to set on top along with the pink butterfly headband shown here.  The original idea had a big bow on the top but I liked the idea of the shoes instead.  Can never have to much bling as far as I'm concerned.


I picked the scroll alphabet letter L for the front and thought briefly of painting it a different color but stuck with the white.  I tied it on to the second layer ribbon with a matching piece of thin ribbon threaded through the mesh.  Additionally, I found some soft baby spoons, some baby washcloths, some hair barrettes, some little girls socks, and a couple of pacifiers with little flowers on the buttons. All in different hues of pink!


It turned out pretty good if I do say so myself.  I thoroughly enjoyed all of the things I made for the shower, but I do think this cake turned out even better than what I had anticipated.  Of course any chance to buy pink girly things I'm totally on board with cuz there need to be more girls in my family!  Current count is 6 grand kids, 5 boys and 1 girl, so the upcoming birth of Laila is greatly anticipated!  Grandma and Grandpa need some more girls to spoil!

More fun projects to come, including how I dressed up the little hearts on top of the diaper cake shown here in this last picture.  Imagine, Create, Enjoy!